Kawasaki Ninja
 |
 KAWASAKI Key NINJA ZX6R ZX7R ZX9R ZX10R ZX12R ZX14 ZR7  US $9.95
|
2010 Kawasaki Z1000 In Focus
Naked bikes have never been popular in America; but this 2010 Kawasaki Z1000 is making another bid in the American market. Kawasaki Zs however are known for their flaws such as excessive vibration and heat from the motor to unbalanced suspensions. This new Z however is nothing like the old ones in fact it's a completely different bike that just happens to share a name.
The new 2010 model comes with a new frame and motor. The new aluminum frame is similar to that of the Ninja ZX-10R. The five-piece frame has 30 pct more torsional rigidity and 9 lbs lighter than the previous steel frame. The old Zs were known for excessive vibrations of their motors; this frame however uses four engine mounts instead of three greatly reducing vibrations that plagued the Zs for years.
A powerful new engine is now displacing 1043cc, 90cc more than its predecessor. This new inline four with a bore and stroke of 77 x 56 mm churn out 138 crankshaft horsepower at 9600 rpm. Torque rating is at 81.1 ft-lbs at 7800 rpm.
Excessive noise plagued the old Z1000s. To solve this problem, Kawasaki overhauled the Z1000s exhaust system from the ground up. The new system has a 4-into-2-pre-chamber-into 2 layout. This mean that the exhaust from the four manifolds now pass into two pre-chambers into the catalyzers and out. Check this out in motorcycle repair manuals. Although the new exhaust system weighs just about the same as the old ones, it has better mass centralization and a much lower center of gravity. Also contributing to noise reduction is a resonator inside the airbox which keeps noise at low levels during low rpms and enhances intake sound at high rpms.
The 41mm inverted fork provides compression damping, rebound damping and spring preload. The shocks damping and preload settings are fully adjustable to suit the rider's needs. The rear monoshock is positioned horizontally to improve mass centralization.
Sharing a name doesn't always mean sharing genes as well. Having more power and its problems ironed out, this bike is ready to redefine naked bike perception in the US. You can avoid this problem by having 1972 mercedes benz operators manual.
what would be a good estimated amount of Dongs in vietnam for a kawasaki ninja?
I was wondering what would be a good estimated amount of Dongs for a kawasaki ninja in vietnam. i'm going to vietnam for vacation and wanted to buy one but i cant seem to find a good estimated amount that would cost me to buy one. If anyone knows or could give me a good answer, thank you.
About 10.000 USD
Check the link i post below, if you can't read vietnamese then use google translate the whole page
Honda's 1000cc MotoGP contender unveiled (Gizmag Emerging Technology Magazine)
Honda's much-awaited 1000cc MotoGP contender, the RC213V, was unveiled at a
Repsol Honda news conference last week prior to three days of official testing
at the Sepang circuit in Malaysia. The RC213V replaces its 800cc predecessor,
the 2011 championship-winning RC212V, with much riding on the shoulders of
Casey Stoner and Dani Pedrosa for the new season... Continue Reading Honda's
1000cc MotoGP contender unveiled
**Section:** Motorcycles
**Tags:** Casey Stoner, Dani Pedrosa, Honda, MotoGP, RC213V, Repsol
**Related Articles:**
* Major factories reveal new 800cc MotoGP machines
* MotoGP 2011: Stoner shines on Honda RC212V
* HONDA unveils RC212V - 2007 MotoGP machine
* Yamaha unveils Rossi's 2008 YZR-M1 MotoGP machine
* Kawasaki unveils 2006 Ninja ZX-RR
* Stoner wins MotoGP, Rossi puts on a display to take second
Gizmag Emerging Technology Magazine
2012 KAWASAKI NINJA® ZX™-14R vs Suzuki Hayabusa
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.